Software Version; Displaying And Changing The Device Type; Displaying Serial Numbers - Lauda E 4 G Operating Instructions Manual

ECO GOLD
8.2.3

Software version

SW version
Control
Safety
Cool
Ext Pt
Analog
Serial
‫סּ‬
ESC
OK
8.2.4

Displaying and changing the device type

Type
−
confirm with .
The device type without the suffix "G" (GOLD) is shown in the menu.
You can change the device type .
Note:
With a change of device type parameters are re-initialized and control parameters adapted by the
user are lost! Therefore, the type change has a three second delay on the key depression.
The overtemperature switch-off point T
GOLD thermostat with a stainless steel bath T
ent bath T = 102 °C.
max
You must now manually re-enter T
(error message in ECO GOLD "T max diff. Ctrl-Safety").
8.2.5

Displaying serial numbers

Serial numbers
Control
LCK1913-11-0002
Cool
KTExy-08-9876
Ext Pt
‫סּ‬
ESC
OK
25/08/2011/ YACE0088
SW version
−
confirm with
1.31.00
Under the menu point SW version the appropriate software
1.31
versions are displayed, depending on the device type and con-
1.27
nected modules.
1.21
3.01
3.03
Standby
is automatically adapted to the device type, i.e. with the ECO
max
max
( 7.4.1), because otherwise the device enters the error status
max
Serial numbers
−
confirm with
Under the Serial numbers menu point the serial numbers of
Control and Safety are displayed. Provided they are available,
the serial numbers of connected modules are also displayed.
Standby
Maintenance
.
= 202 °C, for the ECO GOLD thermostat with transpar-
.
55