Table of Contents
Advertisement
Alpha
StbY
7.11 Standby
The status "Standby" follows any automatic Shut-Down procedure. To reactivate the standard operation
menu, press the <Enter> button and for example modify the latest Setpoint.
S t b Y
7.12 Safety functions
7.12.1
Safety functions and removal
Your Alpha Thermostat triggers alarms, warnings or errors as appropriate.
All warnings, alarms or errors are shown on the LED display.
Alarms:
Alarms are safety relevant. Components (Pump / Heater / Refrigerating Unit) will be shut
down.
Errors:
When an error occurs switch off the device. If the error is always present after switching on
the device, please inform the LAUDA Service Constant Temperature Equipment ( 8.5) or
the local service organisation!
Find cause of alarm, warning or error and rectify where necessary. Then press
head in order to remove the message.
Warnings may be ignored by pressing
June 20, 2018/ YACE0092
StbY
is displayed.
To switch to menu Setpoint (SEt) press <Enter>.
or
on the control head.
Starting up
on the control
31
Hide quick links:
Advertisement
Table of Contents
