G.4.3 Connecting The Thermostat To The Pc - Lauda E 4 G Operating Instructions Manual
Heating and cooling thermostats with control head gold
Hide thumbs
Also See for E 4 G:
- Operating instructions manual (101 pages) ,
- Operation manual (132 pages)
Table of Contents
Advertisement
ECO GOLD
G.4.3 Connecting the thermostat to the PC
If an ECO thermostat is connected via the USB interface, it is automatically assigned to a free COM
port. The PC unambiguously identifies the thermostat via a serial number internal to the thermostat and
always assigns the same COM port to this thermostat.
If further ECO thermostats are connected via the USB interface, these thermostats are assigned other
free COM ports.
25/08/2011/ YACE0088
Appendix with settings
2. Key
Continue
3. Key Finish
Driver installation is installed
1. Plug the USB cable into the control head.
2. Switch on the thermostat at the mains
switch.
109
Hide quick links:
Advertisement
Table of Contents
