E Programmer - Lauda E 4 G Operating Instructions Manual

ECO GOLD
Setpoint offset
Offset source
Diff.set/actual value
‫סּ‬
ESC
OK
Offset source
off
extern Pt100
extern analog
extern serial
extern USB
‫סּ‬
ESC
OK
Offset value
Diff.set/actual value
Max: 500.0
Min: -500.0
‫סּ‬
ESC
OK
−
By pressing
E Programmer
The programming function enables you to save five temperature/time programs. The programs consist of
a number of temperature/time segments and details about their repetition. The total number of freely
programmable segments is 150. Temperature step changes (time is zero) or also temperature retention
phases for the same start and end temperatures in the segment are possible.
On starting the current set value is taken as the starting value of the first segment.
Changes to the pump level are entered in the relevant line. If the pump level is to remain unchanged, "0"
is entered (display shows "---").
25/08/2011/ YACE0088
−
−
0.0
The adjacent menu window appears.
As well as
displayed.
Standby
The adjacent menu window appears on selecting the menu
point
−
The setpoint offset is deactivated with "off".
Standby
−
The adjacent menu window appears. The minimum and maxi-
mum possible offset values and the current offset value are
displayed.
−
−
0.0
−
−
+/-
(ESC) you are returned to the menu level without any change.
Appendix with settings
Access to the main menu level is obtained by pressing the
enter key .
Selection and confirmation of
Setpoint offset.
Diff.set/actual value
Offset source.
Select and confirm setpoint source with
Select and confirm Diff.set/actual value
Change the value with
Single figures can be selected by pressing
By pressing (+/-) the arithmetic sign can be changed.
Confirm your choice with the enter key
Setup Control
the currently set offset value is
or and
with or
or .
or .
.
.
and .
93