LifeGear 75118 Inversion table Owner's Manual page 13

18
4
30
3
44
STEP 8:
Pull out the Large Spring Knob (18), and slide the Adjustable Boom (3) into the square bracket on
the bottom of the Bed Frame (4) as shown. Slide the Adjustable Boom (3) upward until the desired
height on the Height Scale (44) is just below the bracket on the bed frame. Lock the Adjustable
Boom (3) in place by releasing the Large Spring Knob (18) and sliding the Adjustable Boom (3) up
or down slightly until the Large Spring Knob (18) "pops" down into the locked position. For added
safety, secured the Knob (30) into the back side of the bracket on the Bed Frame (4).
12