LifeGear 75118 Inversion table Owner's Manual page 12

STEP 7:
Attach the Adjustable Instep Frame (6) to the Adjustable Boom (3) by inserting the Adjustable
Instep Frame (6) into the square bracket on the boom. Slide the Adjustable Instep Frame (6)
completely into the square bracket, insert the M6x47 Hex Head Bolt (11) with a Ø 16xØ 6.5x1.0
Washer (27) halfway through the square bracket, slide the M6x47 Hex Head Bolt (11) through the
ring at the bottom of the Spring (23), slide the M6x47 Hex Head Bolt (11) through the rest of the
square bracket, and secure at the other end with a Ø 16xØ 6.5x1.0 Washer (27) and M6 Lock Nut
(16). Attach the Square End Cap (41) onto the back of square bracket of Adjustable Boom (3).
Note: To slide the Adjustable Instep Frame (6) into the square frame, you must first pull out the
Small Spring Knob (17).
3
17 17
27 27
16 16
41 41
27 27
11 11
23 23
27 27
6
23 23
27 27
11
16 16
6
11 11