Page 1
LifeGear L1/BARBELL RACK ITEM NO.: 76260 OWNER’S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice. 2010, Dec.
Page 2
ASSEMBLY INSTRUCTIONS---------------------------------------------------------- 5 ONE YEAR LIMITED WARRANTY LifeGear Inc. warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's obligation under this warranty is limited to replacing or repairing, free of charge, any parts which may prove to be defective under normal home use.
Page 3
SAFETY INSTRUCTIONS Basic precautions should always be followed, including the following safety instructions when using this barbell rack: Read all instructions before using this barbell rack. Please make sure all parts are not damaged and fixed well before use. This barbell rack should be placed on a flat surface.
Page 6
ASSEMBLY INSTRUCTIONS Tool: 2 Wrenches 14-17 Step 1 Attach both Base Tubes (1) onto Connector Frames (2) with eight M10x70 Hex Bolts (7), eight M10 Nylon Lock Nuts (14), and sixteen Ø10 Washers (13). Tighten bolts and nuts with two Wrenches provided. Attach four Barbell Frames (3) onto both Base Tubes (1) with eight M10x75 Hex Bolts (8), eight M10 Nylon Lock Nuts (14), and sixteen Ø10 Washers (13).
Page 7
Tool: 2 Wrenches 14-10 Step 2 Attach both Top Tubes (4) onto top ends of the Barbell Frames (3) with four M10x85 Hex Bolts (9), four M10 Nylon Lock Nuts (14), and eight Ø10 Washers (13). Tighten bolts and nuts with two Wrenches provided. Hardware: 4 Hex Bolts (M10x85) 8 Washers (Ø10)
Need help?
Do you have a question about the 76260 and is the answer not in the manual?
Questions and answers