Service Call Errors - Canon PIXMA iP5200R Service Manual

11 times Failed in automatic print head
alignment. [2500]
13 times The remaining ink amount
unknown. [1683]
14 times Ink tank not recognized. [1684] A non-supported ink tank is installed
15 times Ink tank not recognized. [1410
to 1419]
No Access cover open. [1200]
blinking
*1: Only for models supporting CD / DVD printing
*2: Only for models not supporting CD / DVD printing
2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green
(Power LED), or Alarm LED Lit in Orange)
Cycles of
blinking in
Error [Error code]
orange (Alarm
LED) and
green (Power
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
button to eject the paper being used at
error occurrence. Printing will resume
from on the front side of the next page.
Press the Resume/Cancel button.
- If paper is being fed at error
occurrence, the error is indicated after
the paper is ejected.
- If the error occurs, the print head
alignment values are not changed.
- After exit from the error by the
Resume/Cancel button, the automatic
print head alignment will not be re-
done.
An ink tank which has once been empty
is installed. Replace the applicable ink
tank with a new one.
(the ink tank LED is turned off). Install
the supported ink tanks.
An error occurred in an ink tank (the ink
tank LED is turned off). Replace the ink
tank(s).
Close the access cover.
(Replacement of listed parts, which are likely to be faulty)
1-7
paper at error
occurrence is
skipped (not
printed).
The error is
indicated when
the pattern is not
printed due to no
ink or non-
ejection of ink, or
when the
sensor's AD
value is
incorrect.
Printing with a
once-empty or
refilled ink tank
can damage the
print head.
If printing is
continued without
replacing the "no-
good" ink tank,
press the
Resume/Cancel
button for 5 sec.
or longer to
record the use of
a refilled ink tank.
Note:
After the above
operation, the
function to detect
the remaining ink
amount is
disabled.
Solution