Service Call Errors (By Led Blinking In Orange And Green Alternately, Or Lit In Orange) - Canon i960 Service Manual

Hide thumbs Also See for i960:

Quick start manual (92 pages)

Printing manual (2 pages)

Setup instructions (2 pages)

Table Of Contents

Table of Contents

(Operator Call Errors - cont'd -)

LED

blinking in

orange

10 times

No auto duplex printing unit.

[1860]

Automatic duplex printing

cannot be performed (paper

size not supported). [1310]

11 times

Failed in automatic print head

alignment. [2500]

*1: Only for the model supporting CD-R printing (i965).

*2: Only when the paper feed cassette PFC-10 (optional unit) is attached.

*3: Only when the auto duplex printing unit DPU-10 (optional unit) is attached.

2.2 Service Call Errors (by LED Blinking in Orange and Green Alternately, or Lit

in Orange)

LED

alternate blinking

in orange and

green

2 times

3 times

4 times

6 times

7 times

8 times

9 times

10 times

11 times

12 times

Error

Carriage error [5100]

Paper feed error [6000]

Purge unit error [5C00]

Internal temperature

error [5400]

Waste ink absorber full

[5B00]

Print head temperature

rise error [5200]

EEPROM error [6800]

Carriage lift mechanism

error [5110]

Paper feed cassette error

[5900]

Media sensor error

[8000]

Solution

Set the auto duplex printing unit,

and press the Resume/Cancel

button.

Set an automatic duplex printing

supported size of paper, and press

the Resume/Cancel button.

Press the Resume/Cancel button,

and after confirming the following,

perform print head alignment

again:

- Set an appropriate type and size

of paper (plain paper, A4 or

letter).

- Check that the nozzle check

pattern is properly printed (all

ink ejected, no faint printing).

(Replacement of listed parts, which are likely to be faulty)

- Carriage unit (QM2-0729)

- Timing slit strip film (QA4-1053)