Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon PIXMA iP5200R Service Manual

1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
Destination At logic board replacement
settings
(EEPROM
settings)
Waste ink - At logic board replacement
counter - At waste ink absorber
resetting
replacement
(EEPROM
settings)
Paper feed At paper feed motor
motor position replacement
adjustment
CD / DVD - At logic board replacement
detection
- At carriage unit replacement
sensor light
volume
*1
correction
Grease - At carriage unit replacement
application
- At PR shaft ass'y
replacement
- At CL base / gear
replacement
Ink system - At logic board replacement
function check
- At platen unit replacement
- At carriage unit replacement
LF correction
- At feed roller replacement
- At logic board replacement
Note: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as
they are not re-adjustable.
The red screws securing the paper feed motor may be loosened only at replacement of the paper
feed motor unit.
*1: Only for CD / DVD printing supported regions.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Timing
To set the destination.
To reset the waste ink counter. None.
To adjust the belt tension.
(Position the paper feed motor
so that the belt is stretched
tight.)
To correct the light volume for
the CD / DVD detection
sensor.
- To maintain sliding properties
of the carriage shaft and the
lift cam shaft.
- To protect the printer's
sliding portions (gears).
To maintain detection
functionality for presence of
the ink tanks and each ink
tank position.
To correct the line feed
accuracy
1-1
Purpose
None.
Perform in the
service mode.
Perform in the
service mode.
None.
None.
Perform in the
service mode.
FLOIL KG-107A
None.
Perform in the
service mode.
None.
Perform in the
service mode.
Approx.
Tool
time
1 min.
1 min.
5 min.
2 min.
1 min.
1 min.
3 min.