Destination Settings - Canon PIXMA iP5200R Service Manual

2) Press and hold the Resume/Cancel button until the Power LED blinks in green the specified number
of times listed in the table below, and release it. The operation starts.
Power LED
blinking
1 time Print head manual cleaning
2 times Nozzle check pattern printing
3 times Paper feed roller cleaning
4 times Automatic print head alignment Set a sheet of plain paper (A4 or letter) in the ASF.
5 times Bottom plate cleaning
6 times Unspecified
7 times The widest head-to-paper
distance setting
8 times or Unspecified
more
(5) Service mode
Function
Service test print
- Model name
- Destination
- ROM version
- USB serial number
- Waste ink amount
- CD / DVD sensor
correction value
- Ink system function
check result
- CD / DVD sensor
correction result
EEPROM initialization
Waste ink counter
reset

Destination settings

Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Operation
Set a sheet of plain paper (A4 or letter) in the ASF
or the cassette (according to the Paper Feed
switch setting).
Fold a sheet of plain paper (A4 or letter) in half
crosswise, then unfold and set it in the ASF with
the folded ridge facing down.
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
1-25
Remarks
Remarks
Set a sheet of A4 or letter size paper.
For print sample, see 3-4. Verification
Items, (1) Service test print, <Service
test print sample>.
The following items are NOT
initialized, and the shipment arrival
flag is not on:
- USB serial number
- Destination settings
- Waste ink counter
- CD / DVD correction value
If the waste ink amount is 7% or more,
replace the ink absorber kit.