Repair; Notes On Service Part Replacement (And Disassembling / Reassembling) - Canon PIXMA iP5200R Service Manual

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)

Service part
Logic board ass'y
QM2-2733
Ink absorber kit
QY5-0152
Carriage unit
QM2-2251
Paper feed motor
QK1-1502
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
*1
Notes on replacement
- Before removal of the
logic board ass'y,
remove the power cord,
and allow for approx. 1
minute (for discharge of
capacitor's accumulated
charges), to prevent
damages to the logic
board ass'y.
- Before replacement,
check the waste ink
amount (by service test
print or EEPROM
information print). If the
waste ink amount is 7%
or more, also replace the
ink absorber kit when
replacing the logic board
ass'y.
[See 3-3. Adjustment /
Settings, (5) Service
mode, for details.]
- The red screws securing
the paper feed motor are
allowed to be loosened.
(DO NOT loosen any
Adjustment / settings
After replacement:
1. Initialize the EEPROM.
2. Reset the waste ink
counter.
3. Set the destination in
the EEPROM.
4. Correct the CD / DVD
and automatic print
head alignment
sensors.
5. Check the ink system
function.
[See 3-3. Adjustment /
Settings, (5) Service
mode, for details of 1 to 5]
6. Perform the print head
alignment in the user
mode.
After replacement:
1. Reset the waste ink
counter.
[See 3.3. Adjustment /
Settings, (5) Service
mode.]
At replacement:
1. Apply grease to the
sliding portions.
[See 3-3. Adjustment /
Settings, (2) Grease
application.]
After replacement:
1. Correct the CD / DVD
and automatic print
head alignment
sensors.
[See 3.3. Adjustment /
Settings, (5) Service
mode.]
2. Check the ink system
function.
[See 3.3. Adjustment /
Settings, (5) Service
mode.]
3. Perform the print head
alignment in the user
mode.
At replacement:
1. Adjust the paper feed
motor.
1-12
Operation check
- EEPROM information
print
- Service test print
- Printing via USB
connection
- Direct printing from a
digital camera
- Service test print
- EEPROM information
print
- Service test print
(Confirm CD / DVD
and automatic print
head alignment sensor
correction, and ink
system function.)