Canon PIXMA iP5200R Service Manual page 29

(3) Waste ink counter setting
When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste
ink amount, replace the waste ink absorber (ink absorber kit). The standard amount for waste ink
absorber replacement is given in the table below.
Waste ink amount
Less than 7%
7% or more
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3.3. Adjustment / Settings, (5) Service mode, for details.]
(4) User mode
Function
Print head manual
cleaning
Print head deep cleaning - Cleaning black or color separately, or
Paper feed roller
cleaning
Nozzle check pattern
printing
Print head alignment
Bottom plate cleaning
Print head replacement
<Standalone printer operation>
1) Turn on the printer.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
*1
Ink absorber kit replacement
Procedures
- Cleaning both black and color:
See "Standalone printer operation"
below.
- Cleaning black or color separately, or
both black and color:
Perform from the printer driver
Maintenance tab.
both black and color:
Perform from the printer driver
Maintenance tab.
See "Standalone printer operation"
below.
- See "Standalone printer operation"
below.
- Perform from the printer driver
Maintenance tab.
- See "Standalone printer operation"
below.
- Perform from the printer driver
Maintenance tab.
(Automatic head alignment, Manual
head alignment)
Perform from the printer driver
Maintenance tab.
The print head is replaceable at the
same position as for ink tank
replacement. (Open the access cover.
When the carriage stops at the center,
the print head can be replaced.)
1-24
Not required.
Required.
In Custom Settings of the printer
driver Maintenance tab, manual
print head alignment (by
selecting the optimum values) as
with the conventional models can
be performed.
Cleaning of the platen ribs when
the back side of paper gets
smeared.
Remarks