Canon PIXMA iP5200R Service Manual page 11

[1401]
Print head temperature sensor
error [1403]
Faulty EEPROM data of the
print head [1405]
6 times
Inner cover open. [1841]
Inner cover open during
printing on paper. [1846]
Inner cover open (print
continuable). [1851]
Inner cover open during
printing on paper (print NOT
continuable). [1856]
Inner cover closed during CD /
DVD printing (print
continuable). [1850]
Inner cover closed during CD /
DVD printing (print NOT
continuable). [1855]
Multiple ink tanks of the same
7 times
color installed. [1681]
Ink tank in a wrong position.
[1680]
8 times Warning: The waste ink
absorber becomes almost full.
[1700]
9 times The connected digital camera
or digital video camera does
not support Camera Direct
Printing. [2001]
10 times Automatic duplex printing
cannot be performed. [1310]
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
*2 Close the inner cover, and press the
Resume/Cancel button.
Close the inner cover, and press the
*2
Resume/Cancel button to clear the
error. The paper being printed at error
occurrence will be ejected without
printing the remaining data for the
ejected paper, then printing will resume
from the next page.
Close the inner cover, and press the
*1
Resume/Cancel button.
Close the inner cover, and press the
Resume/Cancel button to clear the
*1
error. The paper being printed at error
occurrence will be ejected without
printing the remaining data for the
ejected paper, then printing will resume
from the next page.
Open the inner cover which functions
as the CD / DVD tray feeder, set the
*1 CD / DVD tray in the feeder, and press
the Resume/Cancel button.
Open the inner cover, and press the
Resume/Cancel button to clear the
*1
error. The CD or DVD being printed at
error occurrence will be ejected without
printing the remaining data for the
ejected CD or DVD, then the next print
job will be done.
Replace the wrong ink tank(s) with the
correct one(s).
Install the ink tank(s) in the correct
position.
Pressing the Resume/Cancel button will
exit the error, and enable printing.
Remove the cable between the camera
and the printer.
The size of paper may not be
compatible with automatic duplex
printing. Press the Resume/Cancel
1-6
The service call
error, indicating
the waste ink
absorber is full,
is likely to occur
soon.
Data which was
to be printed on
the back side of