General; Water Inlet Strainer Inspection; Drain Plug Inspection - Yamaha WaveRunner XLT1200 Service Manual

INSP
ADJ
JET PUMP UNIT/GENERAL

Water inlet strainer inspection

1. Inspect:
Water inlet strainer
Contaminants → Clean.
Cracks/damage → Replace.
Inspection steps:
Remove the ride plate.
Refer to "JET PUMP UNIT" in Chapter
6.
Remove the water inlet cover 1.
Inspect the water inlet strainer mesh
a.
Install the water inlet cover.
Install the ride plate.
Refer to "JET PUMP UNIT" in Chapter
6.
Bilge strainer inspection
1. Inspect:
Bilge strainer
Contaminants → Clean.
Cracks/damage → Replace.
Inspection steps:
Remove the ventilation hose and elec-
trical box.
Refer to "ELECTRICAL BOX" in Chap-
ter 7.
Remove the coupling cover.
Disconnect the bilge strainer 1 from
the bilge strainer holder.
Inspect the bilge strainer.
Install the coupling cover.
Install the electrical box and ventila-
tion hose.
Refer to "ELECTRICAL BOX" in Chap-
ter 7.

GENERAL

Drain plug inspection

1. Inspect:
Drain plugs
Cracks/damage → Replace.
O-rings
Cracks/wear → Replace.
Screw threads
Contaminants → Clean.
3-15
E