Ignition Coil; Engine Stop Switch - Yamaha WaveRunner XLT1200 Service Manual

Hide thumbs Also See for WaveRunner XLT1200:
Table of Contents

Advertisement

+
ELEC
IGNITION SYSTEM

IGNITION COIL

1. Measure:
Primary coil resistance
Out of specification → Replace.
Primary coil resistance:
Black/white (B/W) – Body
0.26–0.36 Ω at 20 ˚C (68 ˚F)
NOTE:
When measuring a resistance of 10 Ω or
less with the digital tester, the correct mea-
surement cannot be obtained because of
the tester's internal resistance.
Refer to "Low resistance measurement".
2. Measure:
Secondary coil resistance
Out of specification → Replace.
Secondary coil resistance:
Black/white (B/W) – Spark plug
lead terminal
3.5–4.7 kΩ at 20 ˚C (68 ˚F)

ENGINE STOP SWITCH

1. Check:
Engine stop switch continuity
Out of specification → Replace.
Engine stop switch continuity
(black coupler)
Clip
Position
Installed
Removed
7-17
Lead color
White
Free
Push
Free
Push
E
Black

Advertisement

Table of Contents
loading

Table of Contents