Oil Pump Cable Adjustment - Yamaha WaveRunner XLT1200 Service Manual

Hide thumbs Also See for WaveRunner XLT1200:

Table of Contents

Oil pump cable adjustment

Oil pump lever position

Incorrect → Adjust.

Checking steps:

Fully close the carburetor throttle

Check that the mark a on the oil pump

lever is aligned with the mark b on the

oil pump body.

Oil pump cable

Adjustment steps:

Loosen the locknut 1 and the adjust-

Fully close the carburetor throttle

Adjust the oil pump cable so that the

mark a on the oil pump lever is

aligned with the mark b on the oil

Tighten the adjusting nut and locknut.

If the installation position has been marked

for reference on the inner cable at the car-

buretor end while marks a and b are

aligned, adjusting the cable at the carbure-

tor end is easier.