Inspection - HYOSUNG WOW90 Service Manual

6-9 CHASSIS
● Separate the tie-rod ends ①, nuts ②, ③ and steering
tie-rods ④.
CAUTION
Inside lock nuts ② ② are left-hand thread.
● Remove the cotter pins ⑤, and remove the steering
shaft holder bolts ⑥ .
● Remove the steering shaft holders and steering shaft .

INSPECTION

Inspect the removed parts for the following abnormali-
ties.
� Handlebar distortion
� Handlebar clamp wear
◉ ◉ DUST SEAL
Inspect the dust seals for damage.
◉ ◉ TIE-ROD
Inspect the tie-rod for distortion and the boot for wear.
◉ ◉ STEERING SHAFT AND HOLDER
lnspect the steering shaft for distortion or bend.
lnspect the two steering shaft holders for wear.
②
①
④
①
⑤
Tire side
③
①
⑥