HYOSUNG WOW90 Service Manual page 62

● Install the movable driven face ① to the fixed driven
face ②.
CAUTION
When reinstalling the movable driven face to the
fixed driven face, make sure that the O-ring is
positioned properly.
● Install the spacer and pin ③ at three places on the
driven face hub.
● Apply SUPER GREASE "A"lightly to the cam part
where the pins are placed.
SUPER GREASE"A"
● Position the two O-rings ④.
● Install the movable driven face seat ⑤.
CAUTION
The seat is installed rotatable naturally.
The O-ring get damaged, in case of installed by
force.
ENGINE 3-34
Insert as guide the rim.
Pin
Spacer