HYOSUNG WOW90 Service Manual page 40

◉ TRANSMISSION
● Drain transmission oil.
● Remove the gear box cover ①.
● Remove the drive shaft ②.
● Remove the oil seal ③ from the gear box cover with
the special tool.
Oil seal remover : 09913-50121
CAUTION
The removed oil seal should be replaced with
a new one.
● Remove the bearing ④ with the special tool.
Bearing installer : 09943-88211
CAUTION
The removed bearing should be replaced
with a new one.
● Remove the circlip ⑤ and final driven gear ⑥.
● Remove the idle shaft ⑦.
● Remove the drive shaft bearing ⑧ and idle shaft
bearing.
Rotor remover sliding shaft : 09930-30102
Bearing remover (12mm) : 09921-20210
ENGINE 3-12