◉ ◉ SHOCK ABSORBER
lnspect the shock absorber for oil leakage or other dam-
age.
REASSEMBLY AND REMOUNTING
Reassemble and remount the steering system in the
reverse order of removal and disassembly, and also
carry out the following steps :
● Align the mating face of front brake holder with the
respective punch mark and tighten the bolt.
◉ ◉ TIE ROD
● Install the tie-rod ends ①, nuts ②, ③ and steering tie-
rods ④.
CAUTION
Inside lock nuts ② ② are left-hand thread.
◉ ◉ HANDLEBAR
● Install the handlebar with the punch mark aligned with
the handlebar holder as shown.
● Tighten the handlebar holder bolts to the specified
torque.
Handlebar holder bolt
: 18.4~28.6 Nㆍ ㆍ m (1.84~2.86 kgㆍ ㆍ m)
NOTE :
The gap ⑤ between the handlebar holder should
be even.
②
①
④
⑤
CHASSIS 6-10
Tire side
③
①
⑤