HYOSUNG WOW90 Service Manual page 38

● Loosen the clutch shoe nut with the special tool.
Rotor holder : 09930 - 40113
● Remove the nut while holding down the clutch shoe
assembly by both hands as shown in the illustration.
WARNING
Gradually back off the clutch shoe assembly
pressed down by hand to counter the clutch spring
load. Releasing the hand suddenly may cause the
parts to fly apart.
① Nut
② Clutch shoe assembly
③ Spring
②
CAUTION
Do not attempt to disassemble the clutch
shoe assembly.
It is not serviceable.
● Using a thin blade screwdriver or the like, pry up the
movable driven face spring guide ④.
● Remove the pins ⑤, movable driven face ⑥ and fixed
driven face ⑦.
①
③
ENGINE 3-10