Cdi Unit; Stator Coils - HYOSUNG WOW90 Service Manual

CDI UNIT

Using the pocket tester (R
resistance between the lead wires in the following
table.
1 2
1
OFF
2
14~18
3 3.6~4.4 OFF
4 OFF
8~10
5 12.5~15.5
OFF
6 10.5~13.5 OFF
Pocket tester : 09900 - 25002

STATOR COILS

● Using the pocket tester, measure the resistance
between the lead wire and ground. If the resistance
checked is incorrect, replace the coil.
Stator coil resistance
Lighting coil
Charging coil
Exciting coil
Pick-up coil
◉ ◉ CHARGING OUTPUT CHECK
Start the engine and keep it running at 5,000 rpm.
Measure the DC voltage between the battery terminal �
and � with a pocket tester.
If the tester reads under or over following specification,
check the no-load performance or replace the regula-
tor/rectifier.
CAUTION
When making this test, be sure that the battery is
in fully-charged condition.
Standard charging output
Pocket tester : 09900 - 25002
Engine tachometer : 09900 - 26006
㏀
× 1
range), measure the
Unit :
� Probe of tester
3 4 5
OFF OFF OFF
7~9 3~4 7.5~9.5 5.5~6.5
OFF
OFF
3~4 3~4
6~8 27~33
5~7 2~2.5 6~7
Standard
0.54 ~ 0.80 Ϊ
Y/W - Ground
0.69 ~ 1.30 Ϊ
W/R - Ground
146 ~ 220 Ϊ
B/R - Ground
90 ~ 110 Ϊ
Br - W
13.0 ~ 16.0 V (at 5,000 rpm)
㏀
6
OFF
OFF
2~2.5
29~35
Unit :Ϊ
ELECTRICAL SYSTEM 5-2