HYOSUNG WOW90 Service Manual page 63

3-35 ENGINE
● Install the spring ①.
● Install the clutch shoe assembly ② and nut ③.
● Tighten the nut to the specified torque with the spe-
cial tool.
Rotor holder : 09930-40113
Clutch shoe nut : 40~60 N ∙ ∙ m (4.0~6.0 kg ∙ ∙ m)
● Insert the V-belt between the driven faces as deep
inside as possible while pulling the movable driven
face all the way outside to provide the maximum belt
clearance.
CAUTION
The V-belt should be positioned so that the
arrows on the belt periphery point the normal
turning direction. The V-belt contact face on the
driven faces should be thoroughly cleaned to be
free from oil.
● Thoroughly clean the clutch housing ④ to be free
from oil and position it over the clutch shoe assem-
bly.
● Tighten the clutch housing nut ⑤ to the specified
torque.
Clutch housing nut : 40~60 N ∙ ∙ m (4.0~6.0 kg ∙ ∙ m)