HYOSUNG WOW90 Service Manual page 61

3-33 ENGINE
● Install the circlip ①.
CAUTION
Insert surely in the circlip groove.
● Install the bearing ② with the special tool.
Bearing installer : 09943-88211
CAUTION
A mark part of the bearing is pointed to the outside.
● Install the new O-rings (④, ⑤) to the movable driven
face ③ with the special tool.
Bearing installer : 09913-76010
● Apply SUPER GREASE "A"to the groove of mov-
able driven face' s inside.
SUPER GREASE"A"
Thrust
�
Rounded coner