Reassembly And Remounting - HYOSUNG WOW90 Service Manual

◉ ◉ BRAKE SHOE
Check the brake shoe and decide whether it should be
replaced or not from the thickness of brake lining.
Brake shoe lining
thickness
CAUTION
Replace the brake shoe as a set, otherwise brak-
ing performance will be adversely affected.

REASSEMBLY AND REMOUNTING

Reassemble and remount the front wheel and brake in
the reverse order of removal and disassembly, and also
carry out the following steps :
● When installing the brake camshaft, apply SUPER
GREASE " A " to the camshaft and cam face.
SUPER GREASE " A "
● Install the brake shoes with spring hooks faced inside.
CAUTION
Be careful not to apply too much grease to the
cam and pin. If grease gets on the lining, break
slippage will result.
● Install the brake cam lever to the brake camshaft.
●Tighten the brake cam lever nut to the specified
torque.
Front brake cam lever nut
Service limit
2 mm (0.079 in)
: 6~8 N∙ ∙ m (0.6~0.8 kg∙ ∙ m)
CHASSIS 6-4