Vinten Vision 250 Service Manual page 13

Contents
7 Friction brakes on each axis allow the head to be locked at any chosen position. The operating levers
for both brakes (16)(18)
8 A centre lock (3)
9 A level bubble (4), illuminated by pressing the switch (14), is fitted to the rear of the head.
10 Pan bar mounting points
platform. A telescopic pan bar
available on the mount serrations. A second pan bar may be fitted.
11 Two versions of the head are available. One uses a dual 100/150 mm ball mount
(10). The other has a flat base (7), with ' Quickfix'
a spanner are also provided.
12 The camera is attached to the head by means of a slide plate
adaptor. A clamp (8) is provided to hold the slide plate in position and a lock
removal from the head.
are fitted on the left-hand side of the head.
allows the head to be locked in the horizontal position.
(17) are located at the rear of the head, on either side of the camera mounting
(13) is supplied and is attached using a pan bar clamp, with angular adjustment
®
and standard four-hole fixing. Mounting bolts, washers and
(20)
First Previous Next
Page Page Page
(11) with a bowl clamp
or by using an optional Quickfit
(19) prevents its inadvertent
Previous
View
®
13