Fault messages in the display
Message in the
display
q
Drainage
fault
p
Water inlet
fault
ä
Drum lighting
fault
,
Technical
fault
A To switch off the fault message, press the OK button.
Possible cause
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
The water inlet is blocked
or restricted.
The drum lighting is not
locked in position.
There is a fault.
Problem solving guide
Remedy A
– Clean the drain filter and
the drain pump.
– The maximum drain
height is 1 m.
Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
Check that the drum
lighting is fitted correctly.
Start the programme
again.
If the fault message
appears again, contact the
Service Department.
37