Download  Print this page

Re-fitting The Transit Bars - Miele PW 5065 Operating And Installation Instructions

Hide thumbs


^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of
the washer-extractor. Make sure that
holes b are fitted over retainers a.
Installation and connection
The machine must not be moved
without the transit fittings in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving

Re-fitting the transit bars

Re-fitting is carried out by reversing the


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: