Miele PW 5065 Operating And Installation Instructions page 64

Settings/Supervisor level menu
Language J
The display can be set to appear in
one of several different languages.
You can set the language you want as
the fixed default language in the
Languages sub-menu.
^ Select the language you want and
confirm your selection.
Supervisor level
You can alter the access code to the
supervisor level.
^ Enter the old code.
^ Enter a new code.
After you have confirmed the new
code, the display will change to the
beginning of the Settings menu.
Auto load control
If the auto load control is deactivated,
the machine will always carry out the
programme sequence based on a full
load.
The machine is delivered with this
option activated.
64
Pre-wash water
You can choose for the pre-wash to
be carried out with either hot or cold
water (not applicable to the Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The machine is delivered with the Hot
water option selected.
Main wash water
You can choose for the main wash t
be carried out with either hot or cold
water (not applicable to the Woollens
or Curtains programmes). Hot water
can only be only taken in if the wash
temperature is above 30°C.
The machine is delivered with the Hot
water option selected.
If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.