Spinning; Maximum Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele PW 5065 Operating And Installation Instructions

Maximum final spin speed

Programme
Cottons
Minimum iron
Delicates
Towelling
Table linen
Bed linen
Curtains
Denim
Dark garments
Woollens
Quick wash
Shirts
Starch
Pillows
Outerwear
Proofing
Drain/Spin
Intensive wash*
Flour*
Flour +*
Grease and fat*
Grease and fat +*
Towels short*
Towels +*
Capes*
Chem. Therm. Dis. 20min*
* = These programmes can be selected from the
Settings / Supervisor level menu, if this has been
activated by a Miele service technician or
authorised dealer.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1400
final spin speed will also reduce the
1000
interim spin speed.
600
1400

To omit the final spin (Rinse hold)

1200
^ Select the Rinse hold setting. The
1200
laundry will not be spun and will
400
remain suspended in the final rinse
900
water. This reduces creasing if the
1200
laundry is not going to be removed
1200
from the drum immediately after the
1200
end of the programme.
600
– To start the final spin:
1200
Use the + button to select the spin
1400
speed you want. The final spin will
900
start immediately.
800
1400 – To end the programme:
1400
Press the – or the Door button. The
1400
water will drain away. Press the Door
1400
button again to open the door.
1400
To omit rinse and interim spin and
1400
the final spin
1400
1400
^ Select the Without spin setting. The
600
laundry is not spun after the final
rinse. The water will drain away and
1400
the machine will go straight into the
anti-crease stage.

Spinning

17