Changing The Lamp For The Drum Lighting - Miele PW 5065 Operating And Installation Instructions

Problem solving guide
Changing the lamp for the
drum lighting
The machine will operate with no
lighting in place or if the lighting is
faulty.
^ Open the drum door.
^ Now disconnect the machine from
the electricity supply, see "Warning
and Safety instructions".
^ Remove the yellow lever from behind
the detergent drawer fascia panel.
^ Insert the lever in the slot provided in
the drum lighting unit (see illustration)
and turn anti-clockwise (a quarter
turn) until you feel a resistance.
^ Pull out the loosened unit with your
fingers.
44
^ Press the two prongs to separate the
plastic holder 1 from the protective
cover 2.
^ Remove the faulty lamp from the
plastic holder.
The new lamp must be of the same
type (G4) with a maximum power
output of 5 watts/12 volts.
The lamps are available from an
electrical retailer, your Miele Dealer or
from the Miele Spare Parts Department.
^ Insert the new lamp into the plastic
holder.
^ Carefully fit the plastic holder and the
protective cover together.
^ Insert the lighting unit into the socket
and turn it clockwise to secure it.
It is absolutely essential for the
correct functioning of the
washer-extractor that the drum
lighting unit is fitted correctly in
position.