Settings menu J
Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start button flashes
slowly.
There are two options:
On
Standby comes on:
– if a programme is not selected after
the machine has been switched on.
– after a programme has started.
– at the end of a programme.
Not in current prog. (the machine is
delivered with this option selected)
Standby comes on:
– if a programme is not selected after
the machine has been switched on.
Turning the programme selector or
pressing a button switches the display
back on again.
62
Memory
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again
these settings will appear in the display.
The machine is delivered with the
memory function deactivated.