Download Print this page

Miele PW 5065 LP Installations Plan

Hide thumbs

Advertisement

Quick Links

Installation plan

Washing machine

PW 5065 AV/LP
en - GB
To avoid the risk of accidents or damage to the machine, it is essential to read
operating and installation instructions before installation and commissioning
This prevents both personal injury and damage to the machine.
10 144 240 / 01

Advertisement

loading

  Summary of Contents for Miele PW 5065 LP

  • Page 1: Washing Machine

    Installation plan Washing machine PW 5065 AV/LP en - GB To avoid the risk of accidents or damage to the machine, it is essential to read operating and installation instructions before installation and commissioning This prevents both personal injury and damage to the machine. 10 144 240 / 01...
  • Page 2 Legend: Connection optional or required, Connection required depending on model Dump valve Cold water connection Drain connection Drain pump Machine anchors Equipotential bonding Grey water connection Peak-load connection Dispenser connection Box plinth Electrical connection Open plinth Machine feet, adjustable WTV Washer-dryer stacking kit Payment system Hot water connection Payment system connection...
  • Page 3: Machine Dimensions

    PW 5065 en - GB Machine dimensions 10 144 240 / 01...
  • Page 4 en - GB PW 5065 Installation 10 144 240 / 01...
  • Page 5: Washer-Dryer Stack

    PW 5065 en - GB Washer-dryer stack 10 144 240 / 01...
  • Page 6 en - GB PW 5065 Installation 10 144 240 / 01...
  • Page 7 PW 5065 en - GB Installation 10 144 240 / 01...
  • Page 8: Technical Data

    - GB PW 5065 Technical data PW 5065 AV PW 5065 LP Drum volume Load capacity Door opening diameter Max. spin speed 1400 1400 g factor Residual moisture (standard load per DIN 60456) E l e c t r i c a l c o n n e c t i o n ( E L )
  • Page 9 PW 5065 en - GB Technical data PW 5065 AV PW 5065 LP Standard voltage (CH, DK only) 3N AC 400 V Frequency Total rated load Fuse rating (B trip rating according to EN 60898) 3 x 10 Supply lead min. cross-section mm²...
  • Page 10 Rawl plugs (diameter x length) 8 x 40 8 x 40 Anchoring of Miele plinths   Accessory: Miele plinth (fasteners included) Required anchor points Wood screws according to DIN 571 8 x 65 8 x 65 Rawl plugs (diameter x length)
  • Page 11: Options & Accessories

    PW 5065 en - GB Technical data PW 5065 AV PW 5065 LP Plinth floor anchoring (to be provided on site)   Machine installation on permanent plinth (concrete or masonry) Plinth installation footprint (W/D) 600/650 600/650 Wood screws according to DIN 571...
  • Page 12: Installation And Planning Notes

    85°C. This requires the use of a separate heat-resistant inlet hose. Keep the struts in a safe place. They must be re-fitted if the machine This additional hose must be obtained from Miele Spares. In addition, is to be moved again (e.g. when relocating machine).
  • Page 13 Washer-dryer stack A Miele tumble dryer can be stacked on top of this washer-extractor. A WTV stacking kit (optional accessory) is required for this. Installation of the stacking kit must be performed by Miele Service or an authorised agent.

This manual is also suitable for:

Pw 5065 av