Customer Set Relocation - Samsung OfficeServ 7200 User Instructions

HOLIDAY
This program provides the ability to set as many as 20 different holidays. Each hol-
iday will override the System Operating Mode for that particular date with a pro-
grammed ring plan.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
HOLD - Used to clear an entry.
ACTION
1. Press TRSF and then dial 512
Display shows Holiday 1
2. Press the RIGHT soft key to advance cursor.
Press UP or DOWN key to select a month.
or use the dial pad to enter
a month number (e.g., 12).
3. Press UP or DOWN key to select a day and
press RIGHT soft key to advance cursor
or use the dial pad to enter a day number.
4. Press UP or DOWN to select a ring plan
and press RIGHT soft key to advance cursor
or use the dial pad to enter a ring plan
number (e.g., 4).
5. Press UP or DOWN key to select a voicemail
ring mode and press RIGHT soft key to
advance cursor or use the dial pad to enter
a ring mode number (e.g., 15).
6. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
33
DISPLAY
:MM/DD :RP:VM
01: / : :
:MM/DD :RP:VM
01:_ / : :
:MM/DD :RP:VM
01:12/_ : :
:MM/DD :RP:VM
01:12/31 :_ :
:MM/DD :RP:VM
01:12/31 :4 :_
:MM/DD :RP:VM
01:12/31 :4 :15
Home Page

CUSTOMER SET RELOCATION

This program is used to swap information associated with two stations. All assign-
ments such as trunk ring, station group, station COS, station speed dial etc. will fol-
low this program. 18 button keysets and 28 button keysets can be exchanged. If
incompatible set types are selected the system will provide an ERROR: NO MATCH
message. 18 button and 28 button key assignments should be taken in consider-
ation when relocating these type of sets.The table below shows which phones can
be switched with each other.
NOTE: In order to use this program it must first be activated by a technician. Please
see your installing company to have this done if you wish to use this program.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION
1. Press TRSF 315
Display shows
2. Enter first station number (e.g., 202)
Press RIGHT soft key to move cursor
3. Enter second station number (e.g., 210)
Press RIGHT soft key to enter data
4. Display will return to STEP 1
Go to STEP 2
OR press TRSF to store and exit
programming.
Table of Contents System Admin
DISPLAY
SET RELOCATION
EXT _ EXT
SET RELOCATION
EXT 202 EXT _
SET RELOCATION
EXT 202 EXT 210
SET RELOCATION
EXT _ EXT
34