Samsung OfficeServ 7200 User Instructions page 310

CHECKING A GUEST OUT
OF A ROOM USING THE HOTEL KEY
ACTION
1. Press HOTEL key.
2. Press OUT soft key.
3. Enter room number. (Either manually
on the keypad or by pressing the
associated DSS key).
4. Press YES to check the guest out
and print a room bill.
5. Press HOLD to hold the room for
late check out.
6. Press PRINT to print a copy of the
room bill but not check the guest
out.
NOTES:
1. While a room is in HOLD status, room charge will not increment, while other
guest room related charges can still be billed.
2. When a guest is checked out of a room the room status is automatically changed
to NEEDS CLEANING.
3. Always print a copy of the room bill before check out. Once the room is checked
out, all data related to the room is cleared from the system.
10
DISPLAY
Room Check Phone
Stat Out Bill
Enter Room
NUMBER:
Check Out Room?
YES HOLD PRINT
Home Page
DEPOSIT POSTING
The CREDIT feature allows an administrator display keyset to apply a deposit to a
room bill. This deposit can be used to offset charges already incurred or to prepay
for either of the room associated charges (room or phone).
This credit may be applied during check in or at any time during the guest's stay.
Credits applied, will be automatically deducted from the room bill.
A credit applied to the room bill will be deducted from the total room bill.
At check in, a credit applied to the phone bill, will set a limit to the phone use (when
the credit limit is reached, the system will give two beeps tones, and then disconnect
the caller and restrict the phone, requiring additional deposits).
A credit applied to the phone bill, during the guest's stay, will deduct the deposit
amount from the room bill, and set a limit to the phone use.
Pressing the PRINT key, at the end of the check in procedure will allow the admin-
istrator keyset to verify that credits were properly applied.
Table of Contents Hospitality
11