Samsung OfficeServ 7200 User Instructions page 197

AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer. When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer (see SET ANSWER
• While on hook, press TRANSFER and then dial 110.
• Dial 151 to turn Auto Answer CO on or 150 to turn it off.
• Press TRANSFER to store your selection.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 111 to turn DISP SPDNAME on or 110 to turn it off.
• Press TRANSFER to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
• Press TRANSFER to store your selection.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.
• Press TRANSFER to store your selection.
42
MODE).
Home Page
ENBLOCK DIALING
This option allows you to dial digits then press the SEND button to make the call
(like a cellphone).
• While the handset on-hook press TRANSFER then dial 110.
• Dial 161 to turn Enblock Dialing ON or 160 to turn it off.
• Press TRANSFER to store your selection.
CONFIGURE MOBILE EXTENSIONS
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from. The caller ID field has no effect unless you have been
authorized as an Executive MOBEX user. Check with your telephone system
administrator for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 0 to select the telephone option.
• Dial the number of a C.O. line to use when making calls to this MOBEX port.
• Dial the phone number you can be reached at by users calling this MOBEX
port.
• Press TRANSFER to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 1 to select the caller ID option.
• Dial the phone number you will be calling in from.
• Press TRANSFER to store your selection and exit programming.
Table of Contents DS 5000
(MOBEX)
43