Samsung OfficeServ 7200 User Instructions page 323

SETTING A WAKE UP CALL
If your keyset is programmed with a WAKEUP key you can use this key to enter a
WAKE UP time for a guest room, clear a previously set wake up time or print out a
list of wake up calls to a guest room since that guest checked in.
ACTION
1. To set a wake up call for a guest
room. Press the WAKEUP key and
select SET.
2. Enter the guest room number
on the keypad.
3. Select the wake time setting as
TODAY or DAILY.
4. If the time shown is correct press
YES to set the wake up call.
5. If the time shown is incorrect press
the CLEAR key and re-enter the time.
6. If you want to exit without setting
the wake up call press the EXIT key
and this will return you to idle.
NOTE: Wake up calls use the system clock as a reference, so the system clock must
be set correctly.
SETTING A WAKE UP CALL
FROM A GUEST ROOM
• Lift handset and receive dial tone. Dial the Wake Up feature access code.
• Enter 4 digit military time for the wake up call.
• Receive confi rmation tone and hang up.
NOTE: When using a digital phone in a guest room, a wake up key may be used
instead of dialing an access code.
36
DISPLAY
Wake Up Call
PRINT SET CANCEL
Enter Room
Number:XXXX
Enter Wake Time
HHMM
Enter Wake Time
TODAY DAILY
XXXX Wake HH:MM_
YES CLEAR EXIT
Home Page
CANCELING A WAKE UP CALL
ACTION
1. Press the WAKEUP key and
select CANCEL.
2. Enter the room number, either manually
on the keypad or by pressing the
associated DSS key.
3. The display will confi rm the room
number as shown. Pressing CANCEL
will cancel a wake up call set for this
room.
4. Pressing EXIT will return your
keyset to IDLE and take no action
regarding the wake up calls.
NOTE: Only an administrator keyset can cancel a wakeup call.
Table of Contents Hospitality
DISPLAY
Wake Up Call
PRINT SET CANCEL
Enter Room
NUMBER:XXXX
Room:XXXX Wakeup
CANCEL EXIT
37