Samsung OfficeServ 7200 User Instructions page 18

OfficeServ 7200
TECHNICAL MANUAL
FEATURES
12 CID REVIEW ALL
13 SECURE OHVA
NOT FOR USA
14
AUTO ANS CO
15
ENBLOCK 2LCD
16
STN NO RING
17
FEATURE TONE
18
RCV GPU INFO
19
MISSED CALLS
20
NO DISP TRK#
21
ACTION
1. Press TRANSFER 110
Display shows
2. Dial the option number from above list
(e.g., 4) OR
DESCRIPTION
If this setting is set to OFF the CID review list
will only store CID information for calls that
were not answered at the station and reject
the information for calls that were answered.
When set to ON all calls will be stored in the
list.
When set to OFF an OHVA will be heard
through the keyset speaker rather than the
handset.
When set to ON CO lines programmed to ring
that keyset directly will auto answer if the
keyset is programmed for auto answer in
MMC 103.
For ITP Phones with 2 Line Display
Set to ON will require user to press SEND
button to make a call, it works like a cell
phone. Enblock dialing must be enabled in
MMC 861.
When ON all incoming calls will not ring at
stations.
(NOT FOR USE IN US).
Enables members of a pickup group with
"RCV GRP INFO" set to ON, to receive a short
ring burst along with the call info when
another member of the pickup group receives
a call.
When set to ON the station will display
information about missed calls as well as the
ID of the most recent missed calls.
When set to ON, the feature disables the
trunk number from being displayed on
outgoing calls.
[201]
AUTO HOLD
[201]
HOT KEYPAD :OFF
1.17
Home Page
USER INSTRUCTIONS
PART 1 MAY 2009
DISPLAY
STN ON/OFF
:OFF
STN ON/OFF
Table of Contents