Bluetooth Connection; Single Bay Usb Cradle - Motorola MC9500-K Integrator Manual

Bluetooth Connection

Troubleshooting Bluetooth Connection
Table 10-2
Problem
MC9500-K cannot
find any Bluetooth
devices nearby.
When trying to
connect a Bluetooth
phone and
MC9500-K, the
phone thinks a
previously paired
MC9500-K is used.

Single Bay USB Cradle

Troubleshooting the Single Bay USB Cradle
Table 10-3
Symptom
MC9500-K battery is
not charging.
Cause
Too far from other Move closer to the other Bluetooth device(s), within a range of 10
Bluetooth devices. meters.
The Bluetooth Turn on the Bluetooth device(s) to find.
device(s) nearby
are not turned on.
The Bluetooth Set the Bluetooth device(s) to discoverable mode. If needed, refer
device(s) are not in to the device's user documentation for help.
discoverable mode.
The phone Manually delete the pairing device and name from the phone. Refer
remembers the to the phone's user documentation for instructions.
name and address
of the MC9500-K it
last paired with via
the Bluetooth radio.
Possible Cause
MC9500-K was Ensure cradle is receiving power. Ensure MC9500-K is seated
removed from correctly. Confirm main battery is charging under
cradle or cradle >
System
was unplugged six hours.
from AC power too
soon.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to cradle. Ensure that power is applied to the cradle. The Battery Status LED
flashes amber to indicate that the MC9500-K is charging.
The MC9500-K is Remove and re-insert the MC9500-K onto the cradle properly.
not fully seated in
the cradle.
Extreme battery Battery does not charge if ambient temperature is below 0°C
temperature. (32°F) or above 40°C (104°F).
Single Bay USB Replace the Single Bay USB Cradle.
Cradle is not
functioning
properly.
Maintenance & Troubleshooting 10 - 9
Solution
Action
> . The 4800 mAh battery fully charges in less than
Power
>
Start Settings