2 - 10 MC9500-K Series Mobile Computer Integrator Guide
Four Bay Ethernet Cradle Wall Mounting
To mount the Four Bay Ethernet Cradle on a Universal Wall Mount bracket:
Connect the AC line cord to the power supply.
1.
Route the AC line cord through the bracket.
2.
Connect the DC cable to the power supply. Coil the DC cable so that it fits into the bracket.
3.
AC Line Cord
Power Connections
Figure 2-12
Repeat for each cradle.
4.
While holding the cradle close to the bracket, connect the DC Cable to the power port on the cradle.
5.
Connect a Ethernet cable to the Ethernet Port 1 connector on the back of the cradle.
6.
Ethernet Switch,
Router, or Hub
Connection
Ethernet Cable
Four Bay Ethernet Cradle Connection
Figure 2-13
Route the Ethernet cable through the bracket to an ethernet hub.
7.
Place cables neatly in the bracket and secure with tie wraps as required. Ensure that all cables are within the
8.
bracket to avoid pinching wires.
DC Cable
Ethernet Port 1
DC Cable
Power Port