Four Slot Battery Charger; Cables - Motorola MC9500-K Integrator Manual

10 - 12 MC9500-K Mobile Computer Integrator Guide

Four Slot Battery Charger

r
Troubleshooting The Four Slot Battery Charger
Table 10-7
Symptom
Battery not charging.

Cables

Troubleshooting the Cables
Table 10-8
Symptom
MC9500-K battery is
not charging.
Possible Cause
Battery was Re-insert the battery in the charger or re-connect the charger's
removed from the power supply. The 4800 mAh battery fully charges in less than six
charger or charger hours.
was unplugged
from AC power too
soon.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to Ensure that power is applied to the charger. The Battery Status
charger. LED flashes amber to indicate that the battery is charging.
Battery contacts not Verify that the battery is seated in the battery well correctly with the
connected to contacts facing down.
charger.
Four Slot Battery Replace the Four Slot Battery Charger.
Charger is not
functioning
properly.
Possible Cause
MC9500-K was Connect the power cable correctly. Confirm main battery is
disconnected from charging under
AC power too soon.
battery fully charges in less than six hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
No power to cable. Ensure that power is applied to the cable. The Battery Status LED
flashes amber to indicate that the battery is charging.
The MC9500-K is Detach and re-attach the power cable to the MC9500-K, ensuring
not fully attached to it is firmly connected.
power.
Cable is not Replace the cable.
functioning
properly.
Action
Action
> > >
Start Settings System
. The 4800 mAh
Power