Motorola MC9500-K Quick Start Manual

FEATURES
MC9500-K
9
Quick Start Guide
10
11
12
1
2
3
1 Up/Down Volume Button 6 Microphone 9 Decode LED
2 Scan Button 7 Scan Button 10 Receiver
3 Function Keys 8 Touch Screen 11 Battery Status LED
4 Power Button (with screen protector) 12 WAN Radio Status
5 Keypad LED
Note 1: To warm boot the MC9500-K, press and hold the Power button
for five(5) seconds.
To cold boot the MC9500-K, press and hold the 1, 9 and Power button.
KEYPADS
13 Speaker 18 IrDA Window 21 Headset Connector
14 Camera and Flash 19 Action Button 22 Handstrap
15 Interface Connector 20 Scan Button 23 Battery Release Buttons
16 Stylus 24 Battery
17 Scan Exit Window
8 23
24
(see Data Capture Options)
7
13
23
14
22
6
15
5
16
21 Telephony Numeric
4
20
19
17
18
LED Notifications
Battery Status:
Slow blinking amber: Healthy battery charging
WAN Radio Status:
Slow blinking red: unhealthy battery charging
Flashing green:
WAN activity Solid green: Fully charged healthy battery
Solid red: Fully charged unhealthy battery
Fast blinking amber: Charging error
Decode
Decode:
Battery Status
Red: Scanning active
WAN Radio
Green: Good decode
Status
Red (after Power button
Alpha Numeric
press): Safe to remove
battery
GETTING STARTED
1 2
SIM Card Installation microSD Card Installation
(GSM Only)
1. Press the Power button to suspend the
1. Press the Power button to suspend
device.
the MC9500-K.
2. On the PowerKey Action screen, tap 2. On the PowerKey Action screen, tap
Safe Battery Swap.
Safe Battery Swap.
3. Wait for red Decode LED to turn on and
3. Wait for red Decode LED to turn on and
then turn off.
then turn off.
4. Unhook handstrap.
4. Unhook the handstrap.
5. Press battery release buttons and
5. Press the battery release buttons and
remove battery.
remove the battery.
6. Remove SIM cover using the top
6. Remove the SD card cover using the
Calculator Numeric
end of the stylus. top end of the stylus.
7. Slide SIM card holder to the left. 7. Slide the microSD card door to
8. Lift card holder. the left to unlock.
8. Lift the door.
9. Insert SIM card into SIM holder.
9. Place the microSD card onto the
NOTE :
contacts.
The proper position of the SIM card—the card
connector (i.e., gold area) should be facing
NOTE :
down with the beveled edge facing up. The proper position of the microSD card —
the card connector (i.e., gold area) should
10. Lower the SIM card holder down.
be facing down as shown.
11. Slide SIM card holder to the right to lock
into place. 10. Lower the microSD card door.
12. Reinstall SIM cover. 11. Slide door to the right
to lock into place.
13. Reinstall battery.
14. Connect handstrap. 12. Reinstall the SD card cover.
13. Reinstall the battery.
15. Warm boot the device.
14. Reconnect the handstrap.
15. Warm boot the MC9500-K.
NOTE: For detailed information on SIM card
installation, refer to the MC9500
Alpha Primary Integrator Guide.
It is recommended that this
3 4
product be charged for 24
Insert the Battery Charge the MC9500-K hours before the first use to
ensure that the internal
battery is fully charged.
Single Bay Cradle
1 1
2
Install
1
2
Remove
Four Bay Cradle
Battery Status LED
Install
Charge Level Indicator
Battery Status Button
Remove
Battery Indications
Press the Battery Status button. MC9500-K Battery Status LED
Charge Level Indicator displays approximate
Slow Blinking Amber = Healthy battery charging
battery level.
Slow Blinking Red = Unhealthy battery charging
Solid Green = Healthy battery fully charged
Fully Partially Un-
Solid Red = Unhealthy battery fully charged
Charged Charged healthy
Fast Blinking Amber = Charging error
5
Charge the Battery
Single Slot Spare Battery Charger Four Slot Battery Charger
2
Battery Status LED (in charger)
Slow Blinking Amber = Healthy battery charging
Slow Blinking Red = Unhealthy battery charging
Solid Green = Healthy battery fully charged
Solid Red = Unhealthy battery fully charged
1
Fast blinking Amber = Charging error
Battery Status Indicator
Charge Level Indicator
2
Battery Status Button
Stand-alone Mode
Press the Battery Status button.
Battery Status LED
1
Solid Green = Healthy battery
Solid Red = Unhealthy battery
Battery Indications
2
Charge Level Indicator displays approximate
battery level.
Fully Partially Un-
Charged Charged healthy