Chapter 7 Mc959B-K - Configuration; Introduction; Quick Startup Steps; Gsm Activation - Motorola MC9500-K Integrator Manual

Chapter 7 MC959B-K - Configuration

Introduction

This chapter explains how to activate anMC959B-K on a CDMA or GSM wireless network and establish settings.
The MC959B-K can be used as a modem to connect the MC959B-K to an ISP or work network. The MC959B-K
can connect to the Internet or work network using cellular line.
NOTE Before the MC959B-K can be used on a CDMA wireless network, a provider must be selected, a data-enabled
service plan must be established and the MC959B-K must be properly configured (where applicable).
Network Time Synchronization is not available on the MC959B-K.

Quick Startup Steps

To start using the MC959B-K for with a data connection:
Select the correct carrier/network. See
1.
For GSM networks, install an activated SIM card, if applicable. See
2.
Installing the Secondary SIM Card on page 1-5
1-7.
For CDMA networks, activate the MC959B. See
3.
Configure a data connection, if required. See
4.
For GSM networks, configure GSM settings. See
5.

GSM Activation

To active on a GSM network install an activated SIM card. See
Secondary SIM Card on page
Switching Carrier Networks on page
and then install the battery. See
CDMA Activation on page
Creating a Data Connection on page
GSM Settings on page
1-5.
7-2.
Installing the SIM Card on page 1-3
Installing the Battery on page
7-2.
7-2.
7-4.
Installing the SIM Card on page 1-3
or
or Installing the