Bluetooth Connection - Motorola FR6070Enterprise User Manual

Troubleshooting the FR6070(Continued)
Table 7-1
Problem
The FR6070does
not accept scan
input.

Bluetooth Connection

Troubleshooting Bluetooth Connection
Table 7-2
Problem
FR6070cannot find
any Bluetooth
devices nearby.
Cause
Scanning Load a scanning application on the FR6070. See the
application is not system administrator.
loaded.
Unreadable bar Ensure the symbol is not defaced.
code.
Distance between Place the FR6070within proper scanning range.
exit window and bar
code is incorrect.
FR6070is not Program the FR6070to accept the type of bar code being scanned.
programmed for the
bar code.
FR6070is not If the FR6070does not beep on a good decode, set the application
programmed to to generate a beep on good decode.
generate a beep.
Battery is low. If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner shuts
off before the FR6070low battery condition notification. Note: If the
scanner is still not reading symbols, contact the distributor or
Motorola.
Cause
Too far from other Move closer to the other Bluetooth device(s), within a range of 10
Bluetooth devices. meters.
The Bluetooth Turn on the Bluetooth device(s).
device(s) nearby are
not turned on.
The Bluetooth Set the Bluetooth device(s) to discoverable mode. If needed, refer to
device(s) are not in the device's user documentation for help.
discoverable mode.
Maintenance & Troubleshooting
Solution
Solution
72