Setting Up An Activesync Connection On The Host Computer; Synchronization With A Windows Mobile 6 Device - Motorola MC9500-K Integrator Manual

Setting Up an ActiveSync Connection on the Host Computer

To start ActiveSync:
Select >
1. Start
ActiveSync Window
Figure 3-2
NOTE Assign each mobile computer a unique device name. Do not try to synchronize more than one mobile
computer to the same name.
In the
2. ActiveSync
Connection Settings Window
Figure 3-3
Select the appropriate check box for the type of connection used.
3.
Select the
4. Show status icon in Taskbar
Select to save any changes made.
5. OK

Synchronization with a Windows Mobile 6 Device

NOTE When a mobile computer with Windows Mobile 6 is connected to a host computer and an ActiveSync
connection is made, the WLAN radio (if applicable) is disabled. This is a Microsoft security feature to prevent
connection to two networks at the same time.
>
Programs Microsoft ActiveSync
window, select >
File Connection Settings
check box.
on the host computer. The
. The
Connection Settings
ActiveSync
Window displays.
ActiveSync
window appears.
3 - 3