2 - 14 MC9500-K Series Mobile Computer Integrator Guide
Link LED
(Yellow)
Four Bay Ethernet Cradle LED Indicators
Figure 2-18
Four Bay Charge Only Cradle Wall Mounting
Connect the AC line cord to the power supply.
1.
Route the AC Line Cord through the bracket.
2.
Connect the DC line cord to the power supply. Coil the DC cable so that it fits into the bracket.
3.
AC Line Cord
Power Connections
Figure 2-19
Repeat for each cradle.
4.
While holding the cradle close to the bracket, connect the DC line cord to the power port on the cradle.
5.
Speed LED
(Green)
DC Cable