Keypad Replacement - Motorola MC9500-K Integrator Manual

1 - 10 MC9500-K Mobile Computer Integrator Guide
A clean boot resets the MC9500-K to the factory default settings. All data in the
must download the Clean Boot Package file from the Support Central web site
(http://www.motorola.com/enterprisemobility/support) and install on the MC9500-K.
To perform a clean boot:
Download the Clean Boot Package from the Support Central web site. Follow the instructions included in the
1.
package for installing the package onto the MC9500-K.
Simultaneously press the
2.
Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold the
3.
left scan button.
Insert the MC9500-K into a powered cradle or cable.
4.
The MC9500-K updates and then re-boots.
5.
After successful clean boot, the calibration screen appears.
6.

Keypad Replacement

The MC9500-K has interchangeable modular keypads. The modular keypads can be changed in the field as
necessary to support specialized applications.
CAUTION Do not remove the keypad while the MC9500-K is on. Follow proper Electro-Static Discharge (ESD)
precautions to avoid damage to the device. Proper ESD precautions include, but are not limited to,
working on an ESD mat and ensuring that the operator is properly grounded.
If the MC9500-K is in suspend mode, press the Power button to wake the device. Wait for the MC9500-K to
1.
fully awake from suspend mode.
Press the Power button to suspend the MC9500-K.
2.
Wait for red Decode LED to turn on and then turn off.
3.
Un-hook the handstrap.
4.
Remove the battery.
5.
Remove and discard two screws securing the keypad to the housing.
6.
button and the and
Power 1
Application
keys.
9
folder is retained. You