Table of Contents
Advertisement
Installation Manual for VISIX Network Cameras
4. Use two PA4X24 screws to fix the camera to the ceiling and the screw hole on the camera
should align with the mounting hole on the drilling template.
5. Connect the network cable and power cable; reinstall the right cover and fixator.
Note:
If you need to pull the cable through the side cable outlet of the camera, pull the cables
from the slot without reinstall the fixator.
3xLOGIC, Inc.
•
© 2007-2012 3xLOGIC. Inc. All rights reserved. Information subject to change without notice, 3xLOGIC logo is a trademark of 3xLOGIC, Inc.
Figure 5-6
Slot
Figure 5-7
st
6510 West 91
Avenue
•
Secure the Camera
Reinstall
Westminster, CO 80031
•
(877) 3XLOGIC
•
www.3xlogic.com
25
Advertisement
Table of Contents
