Table of Contents
Advertisement
Using Flash in Wireless Mode
By using two external flashes (AF540FGZ or AF360FGZ) or using the
built-in flash with one or more external flashes, you can shoot in P-TTL
flash mode without connecting the flash units with a cord.
• Set the external flash to WIRELESS.
• Two or more AF540FGZ/AF360FGZ external flashes are required to use
the high-speed sync flash in wireless mode. This function cannot be used
in combination with the built-in flash.
• Set the wireless mode of the external flash not directly connected to
the camera to SLAVE.
Setting the Channel for the External Flash
First, set the channel for the external flash unit.
1
Set the channel for the external flash unit.
2
Remove the cover of the hot shoe, and attach the external
flash.
3
Turn on the camera and the external flash, and press
the shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
Be sure to set all the flashes to the same channel. Refer to the manual
of the AF540FGZ or AF360FGZ for details on how to set the channel
on the external flash.
257
9
Advertisement
Table of Contents
